4.8 from 153 Google reviews

Our services

Hydro Jetting in Beverly & the North Shore

When grease, tree roots or mineral scale coat the inside of a pipe, a snake can punch a hole through the blockage but leave most of the buildup behind. Hydro jetting uses a high-pressure stream of water to scour the pipe walls clean, so the line flows the way it should and stays clear longer.

Brendan D.Google review
“Great service and Colton was very professional! They got here in a timely manner and walked me through exactly what they had to do to fix the problem.”
  • Free phone estimates
  • Same-day service
  • Lifetime guarantee

What’s going on?

Pick the problem and we’ll call you back with the right fix.

What’s the problem?

Takes 30 seconds · No obligation · Or call (978) 922-3274

Hydro Jetting

Signs your pipes need jetting

  • A drain that has been snaked before and keeps clogging
  • Slow kitchen drains in a home or restaurant, usually from grease
  • Roots showing up on camera inside the sewer line
  • A sewer line coated in sludge or mineral scale
  • Grease backing up into floor drains in a commercial kitchen
  • A line that needs to be fully cleaned before pipe lining

How hydro jetting works

We feed a reinforced hose into the line through a cleanout. On the end is a jetting nozzle with small openings. Some point forward to cut through a blockage. Others point backward, which drives the hose deeper and blasts the pipe walls at the same time. As we slowly pull the hose back, the water flushes loosened grease, roots and debris down the line and away.

We choose the nozzle and pressure for the job. A cast iron kitchen line packed with grease needs a different setup than a clay sewer lateral (the pipe running from your building to the street) with roots growing in.

Dash Drains technician using a high-pressure hose in a commercial kitchen

Hydro jetting vs snaking

  • Snaking spins a steel cable through the clog. It is fast and works well on everyday blockages like hair, paper or a single grease plug. See our drain cleaning page.
  • Hydro jetting cleans the full width of the pipe. It removes the buildup that causes repeat clogs, cuts roots back to the pipe wall and leaves the inside of the pipe clean.

Put simply, snaking opens a drain and jetting cleans it. For many recurring problems, jetting is the longer-lasting fix.

Is jetting safe for my pipes?

Jetting is safe for most pipes in sound condition. Old pipe that is badly cracked, crumbling or collapsed can be harmed by the force of the water, though. That is why we usually run a sewer camera inspection first on older lines. If the camera shows a broken pipe, jetting is not the answer. We talk about a repair instead, often trenchless sewer repair or pipe lining.

Our hydro jetting process

  1. Call us any time. A real person answers and gives you a free estimate over the phone.

  2. We arrive on time and find the best access point.

  3. We camera the line first when the pipe's condition is unknown.

  4. We set up the jetter with the right nozzle and pressure for your pipe.

  5. We jet the line, working from the access point out toward the street.

  6. We run the camera again where it helps, so you can see the clean pipe for yourself.

  7. We suggest a maintenance schedule if the buildup is likely to return.

  • Restaurants and commercial buildings

    Restaurant kitchens send grease, oil and food waste down the drain every day. Even with a grease trap in place, buildup forms in the lines past it. Jetting on a regular schedule helps keep kitchens open through busy stretches, like a packed October weekend in Salem. It pairs well with grease trap cleaning and pumping. We also jet main lines for apartment buildings, offices and property managers. See our commercial services.

  • Homes with mature trees

    Roots go looking for water, and older sewer lines with joints give them a way in. In wooded towns like Andover and in older neighborhoods across the North Shore, roots are a common reason for a slow main line. Jetting cuts them back and flushes them out. If roots keep returning through a damaged joint, lining the pipe can seal them out.

Why Dash Drains

  • Family-owned and based in Beverly, MA.
  • Open 24/7 with live answering by real people, not a phone tree.
  • Same-day service and on-time arrivals.
  • Free phone estimates and honest, upfront pricing before work starts.
  • Serving the North Shore, the Merrimack Valley and Manchester, NH. See our service areas.
  • 4.8 stars from 153 Google reviews.

Reviews

What our customers say

4.8 out of 5· 153 Google reviews

Ryan S.Google review
“Joe came over almost immediately, which was incredibly appreciated. He took the time to thoroughly assess the situation, clearly explain what was going on, and walk me through all of my options without any pressure… We ended up going with the hydro jetting service, and the results were incredible.”
Leland W.Google review
“Last week I had my sewage back up into the laundry sink and I called Dash Drains. The tech Sam came by with their machines and a camera. He worked diligently for hours trying to get all the roots out of my pipes and then showed my on camera a completely empty pipe.”
Christopher W.Google review
“Chris A responded to a blocked sewer line in our condo on a Friday evening. Due to the blockage this was not an easy fix. He worked professionally and diligently to find and remove the impacted roots.”
Travis C.Google review
“Chris came out the same day to snake and camera my sewer drain, explained everything thoroughly, and did a fantastic job.”

Hydro jetting FAQs

How often should my lines be jetted?

It depends on what goes down the drain. Busy restaurant kitchens may need regular jetting. Most homes only need it when buildup or roots cause trouble. We suggest a schedule based on what we see.

Does hydro jetting get rid of roots for good?

It cuts roots back to the pipe wall, but they can grow back through a damaged joint. Lining the pipe is the longer-term fix.

Is hydro jetting messy?

No. The water and debris travel down the line and away, not into your home or business.

Can you jet any pipe?

Most pipes in sound condition, yes. We check older or damaged lines with a camera first.

Do I need jetting before pipe lining?

Yes. A liner needs a clean pipe wall to bond to, so we jet the line before lining it.

Need hydro jetting?

Call now. A real person answers, day or night, and the estimate is free.

Call (978) 922-3274 · 24/7